Lona Indoor con Elastico 6x50mt
Lona Indoor con Elastico 6x50mt Lona Indoor para Barcos MT.6X50 Its uniqueness is the two elastic applied laterally along the entire length, to facilitate
and reduce time of installation.
1 - Roll out the cloth from bow to stern keeping the boat leaving a power surplus of
about 50 cm on each side.
2 - Apply two clamps spaced about 30 cm and cut the cloth.
3 - Remove the rubber bands and knot.
4 - Open the canvas on the boat.
5 - Pull the rubber band from one end and knot to hold it in traction.
6 - Use the appropriate pre cuts if needed reinforcements to connect across the
perimeter. Tickness mm. 0.02